Statistics

    Map

Twitter

Calculation of the Heat Transfer Surface Area of Heat Exchangers for Waste Heat Recovery with the Kaline Cycle
( Vol-5,Issue-11,November 2018 )
Author(s):

Felipe Raúl Ponce Arrieta, Josme de Sousa Santos, Wagner Henrique Saldanha

Keywords:

heat exchanger, waste heat recovery, Kalina cycle.

Abstract:

The purpose is to calculate the heat transfer surface area of the shell and tube heat exchanger aiming recovery to waste heat with Kalina cycles. The procedure for calculating the area was implemented in software Engineering Equation Solver (EES), where the calculation of the LMTD was held with the existing functions in EES for the correction factor calculation, and additional correlations were implemented in the EES to calculate the thermodynamic properties of NH3-H2O mixture and to determine the transport properties of the phase change regions. As input data for the calculations were employed geometry (internal and external diameters of the tubes, the exchanger arrangement, geometrical arrangement of the tubes) and the heat balance of the heat exchanger (temperature, concentration of NH3-H2O mixture, etc.) obtained by simulation of the Kalina cycle. As an example of the results that were obtained for the evaporator, the overall heat transfer coefficient was found to be 108,5 W/m2K and the heat transfer surface area of 1170 m2. This value of the overall heat transfer coefficient is within the ranges reported in the literature by other researchers.

ijaers doi crossref DOI:

10.22161/ijaers.5.11.4

Paper Statistics:
  • Total View : 45
  • Downloads : 13
  • Page No: 013-016
Cite this Article:
MLA
Felipe Raúl Ponce Arrieta et al ."Calculation of the Heat Transfer Surface Area of Heat Exchangers for Waste Heat Recovery with the Kaline Cycle". International Journal of Advanced Engineering Research and Science(ISSN : 2349-6495(P) | 2456-1908(O)),vol 5, no. 11, 2018, pp.013-016 AI Publications, doi:10.22161/ijaers.5.11.4
APA
Felipe Raúl Ponce Arrieta, Josme de Sousa Santos, Wagner Henrique Saldanha(2018).Calculation of the Heat Transfer Surface Area of Heat Exchangers for Waste Heat Recovery with the Kaline Cycle. International Journal of Advanced Engineering Research and Science(ISSN : 2349-6495(P) | 2456-1908(O)),5(11), 013-016. http://dx.doi.org/10.22161/ijaers.5.11.4
Chicago
Felipe Raúl Ponce Arrieta, Josme de Sousa Santos, Wagner Henrique Saldanha. 2018,"Calculation of the Heat Transfer Surface Area of Heat Exchangers for Waste Heat Recovery with the Kaline Cycle". International Journal of Advanced Engineering Research and Science(ISSN : 2349-6495(P) | 2456-1908(O)).5(11):013-016. Doi: 10.22161/ijaers.5.11.4
Harvard
Felipe Raúl Ponce Arrieta, Josme de Sousa Santos, Wagner Henrique Saldanha. 2018,Calculation of the Heat Transfer Surface Area of Heat Exchangers for Waste Heat Recovery with the Kaline Cycle, International Journal of Advanced Engineering Research and Science(ISSN : 2349-6495(P) | 2456-1908(O)).5(11), pp:013-016
IEEE
Felipe Raúl Ponce Arrieta, Josme de Sousa Santos, Wagner Henrique Saldanha."Calculation of the Heat Transfer Surface Area of Heat Exchangers for Waste Heat Recovery with the Kaline Cycle", International Journal of Advanced Engineering Research and Science(ISSN : 2349-6495(P) | 2456-1908(O)),vol.5,no. 11, pp.013-016,2018.
Bibtex
@article {feliperaúlponcearrieta2018calculation,
title={Calculation of the Heat Transfer Surface Area of Heat Exchangers for Waste Heat Recovery with the Kaline Cycle},
author={ Felipe Raúl Ponce Arrieta, Josme de Sousa Santos, Wagner Henrique Saldanha},
journal={International Journal of Advanced Engineering Research and Science},
volume={5},
year= {2018},
}
Share:
References:

[1] Zhang, X., HE, M., Zhang, Y., (2012). A review of research on the Kalina cycle. Renewable and sustainable energy reviews, vol. 16, No. 7, pp. 5309-5318. [2] Shankar, R., Srinivas, T., (2016). Options in Kalina Cycle Systems. Energy Procedia, vol. 90, pp. 260-266. [3] Wall, G., Chuang, C., Ishida, M., (1989). Exergy study of the Kalina cycle. Analysis and design of energy systems: analysis of industrial processes, vol. 10, No. 3, pp. 73-77. [4] Khankari, G., Munda, J., Karmakar, S., (2016). Power generation from condenser waste heat in coal-fired thermal power plant using Kalina cycle. Energy Procedia, vol. 90, pp. 613-624. [5] Rivera, W.; Best, R., (1999). Boiling heat transfer coefficients inside a vertical smooth tube for water/ammonia and ammonia/lithium nitrate. International Journal of Heat and Mass Transfer, No. 42, pp. 905–921. [6] Khir, Tahar et al., (2005). Experimental study on forced convective boiling of ammonia–water mixtures in a vertical smooth tube. Arabian Journal for Science and Engineering, Jeddah, Vol. 30, No. 1B, pp. 47–63. [7] Araújo, J.J. P., Santos, C.A.C., Duarte, J.B.F., Holanda, C.A.M., (2013). Calculation of the coefficient of heat transfer for Evaporation convective in saturated stream for cooling Fluids: R-12, R-22, R-134a, R-600 and R-717. International Congress of Mechanical Engineering, No. 22, pp. 8347–8356. [8] Shah, M.M., (2015). A method for predicting heat transfer during boiling of mixtures in plain tubes. Applied Thermal Engineering, No. 89, pp. 812–821. [9] Mirolli, Mark D., (2006). Cementing Kalina cycle effectiveness. Industry Applications Magazine - IEEE, California, Vol. 12, pp. 60–64. [10] Kalina, A. et al., (1995). Recent development in the application of Kalina cycle for geothermal plants. Proceedings of World Geothermal Congress, Florence, pp. 2093-2096. [11] Arrieta, F.R.P., Irokawa, G.N.F., Júnior, E.P.B. and Santos, J.S., (2015). Avaliação termoeconômica de um ciclo Kalina para a recuperação de calor residual. Congress on Computational Methods in Engineering, No. 35. [12] Thulukkanam, K., (2013). Heat exchanger design handbook. CRC press. [13] Bejan, A., (2013). Convection heat transfer. 4 Ed., Wiley. [14] Incropera, F.P., Dewitt, D.P, Bergman, T.L., Lavine, A.S., (2008). Fundamentos de transferência de calor. 6 Ed., LTC. [15] Walas, S.M., (1990). Chemical Process Equipment: Selection and Design. Butterworth-Heinemann Series in Chemical Engineering. [16] Saldanha, W. H. et al., (2017). Choosing the best evolutionary algorithm to optimize the multiobjective shell and tube heat exchanger design problem using PROMETHEE. Applied Thermal Engineering, vol. 127, pp. 1049-1061.