Statistics

    Map

Twitter

Effect of Process Parameter in SAW- A Review
( Vol-4,Issue-10,October 2017 )
Author(s):

Uma Gautam

Keywords:

Welding Current, Arc Voltage, Welding Speed, Wire Diameter, Wire size.

Abstract:

In research organizations and industries, most widely used welding methods are shield metal arc welding (SMAW), gas metal arc welding (GMAW), gas tungsten arc welding (GTAW) and submerged arc welding (SAW). The SAW process is often preferred because it offers high production rate, high melting efficiency, ease of automation and low operator skill requirement. This study expose the different works have been done in the past for improving different properties of welded material. This study also exhibits the effect of different welding process parameters that affect the weld chemistry. Depending upon the requirement the details of past work will we easily obtained for future work with the help of this study.

ijaers doi crossref DOI:

10.22161/ijaers.4.10.3

Paper Statistics:
  • Total View : 57
  • Downloads : 11
  • Page No: 013-017
Cite this Article:
Show All (MLA | APA | Chicago | Harvard | IEEE | Bibtex)
Share:
References:

[1] V. GUNARAJ AND N. MURUGAN 2000,” Prediction and Optimization of Weld Bead Volume for the Submerged Arc Process — Part 1” Welding Journal, pg.286-294
[2] V. GUNARAJ AND N. MURUGAN 2000,” Prediction and Optimization of Weld Bead Volume for the Submerged Arc Process — Part 2” Welding Journal, pg.331-338
[3] S. R. BHIDE, P. MICHALERIS, M. POSADA, AND J. DELOACH,2006 ” Comparison of Buckling Distortion Propensity for SAW, GMAW, and FSW” Welding Journal, pg 189-195
[4] Rayes, E.L., C., Walz, and G., Sepold, 2004. “The influence of various hybrid welding parameters on bead geometry”, Welding Journal, pp.147s – 153s
[5] P. J. KONKOL AND M. F. MRUCZEK 2007,” Comparison of Friction Stir Weldment and Submerged Arc Weldments in HSLA-65 Steel, Welding Journal, pg 187-195.
[6] P. KANJILAL, T. K. PAL, AND S. K. MAJUMDAR, 2007,” Prediction of Element Transfer in Submerged Arc Welding” Welding Journal, pg 135-146.
[7] X. R. LI, Y. M. ZHANG, AND L. KVIDAHL 2013,” Penetration Depth Monitoring and Control in Submerged Arc Welding” Welding Journal, pg 48-56.
[8] P. F. MENDEZ, G. GOETT, AND S. D. GUEST 2015,” High Speed Video of Metal Transfer in Submerged Arc Welding” Welding Journal ,pg 326-333.
[9] D.-W. CHO, D. V. KIRAN, AND S.-J. NA 2015,” Analysis of the Flux Consumption and Metal Transfer for Tandem Submerged Arc Welding Process under Iso Heat Input Conditions “Welding Journal, pg 396-401.
[10] G. GÖTT, A. GERICKE, K.-M. HENKEL, AND D. UHRLANDT 2016,” Optical and Spectroscopic Study of a Submerged Arc Welding Cavern” Welding Journal, pg 491-499.