Statistics

    Map

Twitter

Experimental Design and Optimization of Conical Horn of Ultrasonic Amplitude
( Vol-5,Issue-6,June 2018 )
Author(s):

Djo Bakadiasa Kabongo, YA Gang

Keywords:

Conical ultrasonic amplitude horn; Finite element analysis; Impedance analysis .

Abstract:

Based on the basic principle of particles and the simple mechanical vibration system, then according to the wave equation and the traditional design theory of the amplitude transformer, we design an amplitude transformer commonly used in the equipment of Ultrasonic machining. Then, the structure is analyzed by the finite element analysis software ANSYS in the modal and harmonic response module and further optimized to obtain the design parameters of the amplitude transformer with good performances. Finally, the amplitude transformer is made according to optimized parameters and later it is analyzed by the impedance analyzer. And then the designed transformer is further modified to achieve better performance.

ijaers doi crossref DOI:

10.22161/ijaers.5.6.15

Paper Statistics:
  • Total View : 80
  • Downloads : 20
  • Page No: 095-099
Cite this Article:
MLA
Djo Bakadiasa Kabongo et al ."Experimental Design and Optimization of Conical Horn of Ultrasonic Amplitude ". International Journal of Advanced Engineering Research and Science(ISSN : 2349-6495(P) | 2456-1908(O)),vol 5, no. 6, 2018, pp.095-099 AI Publications, doi:10.22161/ijaers.5.6.15
APA
Djo Bakadiasa Kabongo, YA Gang(2018).Experimental Design and Optimization of Conical Horn of Ultrasonic Amplitude . International Journal of Advanced Engineering Research and Science(ISSN : 2349-6495(P) | 2456-1908(O)),5(6), 095-099. http://dx.doi.org/10.22161/ijaers.5.6.15
Chicago
Djo Bakadiasa Kabongo, YA Gang. 2018,"Experimental Design and Optimization of Conical Horn of Ultrasonic Amplitude ". International Journal of Advanced Engineering Research and Science(ISSN : 2349-6495(P) | 2456-1908(O)).5(6):095-099. Doi: 10.22161/ijaers.5.6.15
Harvard
Djo Bakadiasa Kabongo, YA Gang. 2018,Experimental Design and Optimization of Conical Horn of Ultrasonic Amplitude , International Journal of Advanced Engineering Research and Science(ISSN : 2349-6495(P) | 2456-1908(O)).5(6), pp:095-099
IEEE
Djo Bakadiasa Kabongo, YA Gang."Experimental Design and Optimization of Conical Horn of Ultrasonic Amplitude ", International Journal of Advanced Engineering Research and Science(ISSN : 2349-6495(P) | 2456-1908(O)),vol.5,no. 6, pp.095-099,2018.
Bibtex
@article {djobakadiasakabongo2018experimental,
title={Experimental Design and Optimization of Conical Horn of Ultrasonic Amplitude },
author={Djo Bakadiasa Kabongo, YA Gang},
journal={International Journal of Advanced Engineering Research and Science},
volume={5},
year= {2018},
}
Share:
References:

[1] L. Filice, F. Micari, S. Rizzuti et al. (2007).A critical analysis on the friction modeling in orthogonal machining. International Journal of Machine Tools and Manufacture, vol .47, pp. 709-714.
[2] Xie Miao xia, Li Quan lu, Li Xiao juan.Finite element analysis of stepped variable amplitude poles. (2006).Journal of Natural Science of Heilongjiang University, vol.23, no.6, pp.847-850.
[3] Liu Zhan feng, Li Pei fan, Wang Tianqi. (2008).Design and Research of Ultrasonic Composite Horns.Modern Manufacturing Engineering, vol.2, no.4, pp.102-105.
[4] J. Mackerle, Finite element analysis and simulation of machining: an addendum: a bibliography (2003). International Journal of Machine Tools and Manufacture, vol.43, no.5, pp.103-114.
[5] Zheng Shuyou, Feng Pingfa, Xu Xipeng.(2009). Research progress of rotary ultrasonic machining technology. Journal of Tsinghua University,vol.49,no.11,pp.1799-1804
[6] K.M. Shu, J.W. Chen.(2015). The Design of Acoustic Horns for Ultrasonic Aided Tube Double Side Flange Making. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, vol.55, no.4,pp. 838-841.
[7] Liu Zexiang. Design and experimental study of rotating ultrasonic composite machining device (2014). Nanjing Agricultural University.
[8] Zhang Yundian. (1995).Ultrasonic Processing Technology and Its Application [M]. Beijing: National Defense Industry Press.
[9] Zhu xi. (2005). finite Element Resonance Analysis of Ultrasonic Horns. Mechanical Engineer, vol.32, no.12, pp.13-15.
[10] Liang Jing jing,Liu Yong jiang,Wu Yan,et al.(2008).Ultrasonic Processing Technology and Its Application in Ceramic Processing. Mechanical Management and Development, vol.18, no.1, pp.63-64.