Statistics

    Map

Twitter

Measurement of a superficial texture by applying the alpha parameter on the profile P, for measuring a manual transmission gear
( Vol-5,Issue-6,June 2018 )
Author(s):

Saraiva Q. M., Magalhães Junior P.A.A.

Keywords:

Superficial Texture, P Profile, Manual Transmission Synchronization.

Abstract:

The objective of this work is to demonstrate the P Profile application in the measurement of superficial texture of the cone seat of the synchronization ring gear of a Mechanical Transmission. It is known that this superficial texture is an essential factor for the good performance and durability of a Mechanical Transmission, since the variation of this texture is directly linked to the synchronization failure, premature wear of the synchronization ring coupling guides, gear and sleeve.

ijaers doi crossref DOI:

10.22161/ijaers.5.6.16

Paper Statistics:
  • Total View : 78
  • Downloads : 29
  • Page No: 100-103
Cite this Article:
MLA
Saraiva Q. M. et al ."Measurement of a superficial texture by applying the alpha parameter on the profile P, for measuring a manual transmission gear". International Journal of Advanced Engineering Research and Science(ISSN : 2349-6495(P) | 2456-1908(O)),vol 5, no. 6, 2018, pp.100-103 AI Publications, doi:10.22161/ijaers.5.6.16
APA
Saraiva Q. M., Magalhães Junior P.A.A.(2018).Measurement of a superficial texture by applying the alpha parameter on the profile P, for measuring a manual transmission gear. International Journal of Advanced Engineering Research and Science(ISSN : 2349-6495(P) | 2456-1908(O)),5(6), 100-103. http://dx.doi.org/10.22161/ijaers.5.6.16
Chicago
Saraiva Q. M., Magalhães Junior P.A.A.. 2018,"Measurement of a superficial texture by applying the alpha parameter on the profile P, for measuring a manual transmission gear". International Journal of Advanced Engineering Research and Science(ISSN : 2349-6495(P) | 2456-1908(O)).5(6):100-103. Doi: 10.22161/ijaers.5.6.16
Harvard
Saraiva Q. M., Magalhães Junior P.A.A.. 2018,Measurement of a superficial texture by applying the alpha parameter on the profile P, for measuring a manual transmission gear, International Journal of Advanced Engineering Research and Science(ISSN : 2349-6495(P) | 2456-1908(O)).5(6), pp:100-103
IEEE
Saraiva Q. M., Magalhães Junior P.A.A.."Measurement of a superficial texture by applying the alpha parameter on the profile P, for measuring a manual transmission gear", International Journal of Advanced Engineering Research and Science(ISSN : 2349-6495(P) | 2456-1908(O)),vol.5,no. 6, pp.100-103,2018.
Bibtex
@article {saraivaq.m.2018measurement,
title={Measurement of a superficial texture by applying the alpha parameter on the profile P, for measuring a manual transmission gear},
author={Saraiva Q. M., Magalhães Junior P.A.A.},
journal={International Journal of Advanced Engineering Research and Science},
volume={5},
year= {2018},
}
Share:
References:

[1] Machado, A. R; Abrão, A. M; Coelho, R. T; da Silva, M. B. Teoria da usinagem dos materiais. São Paulo: ed. Blucher, p.408. [2] Shaw, M. C. (1984). Metal Cutting Principles. Oxford, UK: Oxford University Press. P.165. (reprinted 1997) [3] Agostinho, O. L. (2001) Tolerâncias, ajustes, desvios e análise de dimensões. ed. Blucher. [4] Safdar, A.; H.E, H.Z.; Wei, L.Y.;SNIS, A.; Paz, L.E.C. (2012) Effect of process parameters settings and thickness on surface roughness of EBM produced Ti‐6Al‐4V. Rapid Prototyping Journal, v.18, p. 401 -408. [5] Oliveira, C. J. (2004). Avaliação da influência de sistemas de filtragem aplicados a topografia de superfícies em usinagem. 135f. Dissertation (Master degree) - Pontifícia Universidade Católica de Minas Gerais. [6] Escopel (2010). Rugosidade Superficial course book, FIERGS e SENAI.