Statistics

    Map

Twitter

Resistance Spot Welding of Dissimilar Steels: Temperature Curves
( Vol-5,Issue-5,May 2018 )
Author(s):

Diego Fonseca Silva, Pedro Paiva Brito, Pedro Américo Almeida Magalhães Júnior, Thaís Roberta Campos

Keywords:

Carbon steel, spot welding, stainless steel, temperature curves, thermal conductivity.

Abstract:

Resistance spot welding was used to joint AISI 316L austenitic stainless steel and AISI 1020 low carbon steel. During the welding process, temperature measurements were taken to obtain the temperature curves. Because of the different chemical compositions of the carbon steel and stainless steels, their thermal conductivity values are also different. Electrical resistivity is also an important parameter when carbon steel is spot welded to stainless steel. Differences in the thermal conductivity and in the electrical resistivity of metals lead to an asymmetrical weld nugget in the dissimilar joints. Dissimilar resistance spot welding can be more complex than similar welding due to different thermal cycle experienced with each metal.

ijaers doi crossref DOI:

10.22161/ijaers.5.5.33

Paper Statistics:
  • Total View : 90
  • Downloads : 33
  • Page No: 252-255
Cite this Article:
MLA
Diego Fonseca Silva et al ."Resistance Spot Welding of Dissimilar Steels: Temperature Curves". International Journal of Advanced Engineering Research and Science(ISSN : 2349-6495(P) | 2456-1908(O)),vol 5, no. 5, 2018, pp.252-255 AI Publications, doi:10.22161/ijaers.5.5.33
APA
Diego Fonseca Silva, Pedro Paiva Brito, Pedro Américo Almeida Magalhães Júnior, Thaís Roberta Campos(2018).Resistance Spot Welding of Dissimilar Steels: Temperature Curves. International Journal of Advanced Engineering Research and Science(ISSN : 2349-6495(P) | 2456-1908(O)),5(5), 252-255. http://dx.doi.org/10.22161/ijaers.5.5.33
Chicago
Diego Fonseca Silva, Pedro Paiva Brito, Pedro Américo Almeida Magalhães Júnior, Thaís Roberta Campos. 2018,"Resistance Spot Welding of Dissimilar Steels: Temperature Curves". International Journal of Advanced Engineering Research and Science(ISSN : 2349-6495(P) | 2456-1908(O)).5(5):252-255. Doi: 10.22161/ijaers.5.5.33
Harvard
Diego Fonseca Silva, Pedro Paiva Brito, Pedro Américo Almeida Magalhães Júnior, Thaís Roberta Campos. 2018,Resistance Spot Welding of Dissimilar Steels: Temperature Curves, International Journal of Advanced Engineering Research and Science(ISSN : 2349-6495(P) | 2456-1908(O)).5(5), pp:252-255
IEEE
Diego Fonseca Silva, Pedro Paiva Brito, Pedro Américo Almeida Magalhães Júnior, Thaís Roberta Campos."Resistance Spot Welding of Dissimilar Steels: Temperature Curves", International Journal of Advanced Engineering Research and Science(ISSN : 2349-6495(P) | 2456-1908(O)),vol.5,no. 5, pp.252-255,2018.
Bibtex
@article {diegofonsecasilva2018resistance,
title={Resistance Spot Welding of Dissimilar Steels: Temperature Curves},
author={Diego Fonseca Silva, Pedro Paiva Brito, Pedro Américo Almeida Magalhães Júnior, Thaís Roberta Campos},
journal={International Journal of Advanced Engineering Research and Science},
volume={5},
year= {2018},
}
Share:
References:

[1] ALENIUS, M. et al. Exploring the mechanical properties of spot welded dissimilar joints for stainless and galvanized steels. Welding research, Finland, p. 305-313, 2006.
[2] MARASHI, P. et al. Microstructure and failure behavior of dissimilar resistance spot welds between low carbon galvanized and austenitic stainless steels. Materials science and engineering, Tehran, p.175-180, 2008.
[3] KOLARIK, Ladislav et al. Resistance spot welding of dissimilar steels. Acta polytechnica, Praha, p. 43-47, 2012.
[4] POURANVARI, M. et al. Similar and dissimilar RSW of low carbon and austenitic stainless steels: effect of weld microstructure and hardness profile on failure mode. Materials science and technology, Dezful, p. 1411-1416, 2009.
[5] ABADI, Mehdi Mansouri Hasan et al. Correlation between macro/micro structure and mechanical properties of dissimilar resistance spot welds of AISI 304 austenitic stainless steel and AISI 1008 low carbon steel. Association of metallurgical engineers of Serbia – AMES, Iran, p. 133-146, 2010.
[6] ARAVINTHAN, A. et al. Analysis of spot weld growth on mild and stainless steel. Supplement to the welding journal, Malaysia, p.143-147, 2011.
[7] FARIA, André Luiz Oliveira de et al. Dissimilar resistance spot welding of AISI 1010 carbon steel and AISI 304 austenitic stainless steel. In: 8th BRAZILIAN CONGRESS OF MANUFACTURING ENGINEERING, 2015, Bahia.
[8] POURANVARI, M. et al. Critical review of automotive steels spot welding: process, structure and properties. Science and technology of welding and joining, Tehran, p. 361-403, 2013.
[9] KIANERSI, Danial et al. Resistance spot welding joints of AISI 316L austenitic stainless steel sheets: phase transformation, mechanical properties and microstructure characterization. Materials and design, Tehran, p. 251-263, 2014.
[10] HASANBASOGLU, Ahmet et al. Resistance spot weldability of dissimilar materials (AISI 316L – DIN EN 10130-99 steels). Materials and design, Karabuk, p. 1794-1800, 2007.
[11] KOCABEKIR, Bayram et al. An effect of heat input, weld atmosphere and weld cooling conditions on the resistance spot weldability of 316L austenitic stainless steel. Journal of materials processing technology, Karabuk, p. 327-335, 2008.
[12] MARASHI, P. et al. Relationship between failure behavior and weld fusion zone attributes of austenitic stainless steel resistance spot welds. Materials science and technology, Tehran, p. 1506-1512, 2008.
[13] POURANVARI, M. et al. Failure mode of dissimilar resistance spot welds between austenitic stainless and low carbon steels. Metal 2008, Tehran, p. 1-6, 2008.
[14] MOSHAYEDI, Hessamoddin et al. Resistance spot welding and the effects of welding time and current on residual stresses. Journal of materials processing technology, Tehran, p. 2545-2552, 2014.
[15] POURANVARI, M. et al. Failure mode transition in AHSS resistance spot welds. Part I. Controlling factors. Materials science and engineering, Tehran, p. 8337-8343, 2011.
[16] KIANERSI, Danial et al. Effect of welding current and time on the microstructure, mechanical characterizations, and fracture studies of resistance spot welding joints of 316L austenitic stainless steel. Metallurgical and materials transactions, Tehran, 2014.
[17] POURANVARI, M. et al. Effect of weld nugget size on overload failure mode of resistance spot welds. Science and technology of welding and joining, Tehran, p. 217-225, 2007.
[18] ASLANLAR, S. et al. Welding time effect on mechanical properties of automotive sheets in electrical resistance spot welding. Materials and design, Sakarya, p. 1427-1431, 2008.
[19] FUKUMOTO, Shinji et al. Small-scale resistance spot welding of austenitic stainless steels. Materials science and engineering, Hyogo, p. 243-249, 2008.
[20] CHARDE, Nachimani et al. Materials characterizations of mild steels, stainless steels, and both steel mixed joints under resistance spot welding. Int j adv manuf technol, Malaysia, p. 373-384, 2014.
[21] ALENIUS, M. T. et al. Mechanical and corrosion properties of spot-welded high-strength austenitic stainless steel EN 1.4318. Materials and corrosion, Finland, p. 296-302, 2008.