Tensile Test: Comparison Experimental, Analytical and Numerical Methods
( Vol-4,Issue-11,November 2017 )

Tatiana Lima Andrade, Pedro Américo Almeida Magalhães Júnior, Wagner Andrade de Paula


Hooke’s Law, Plastic-strain, Tensile test.


The objective of this work is to study and analyze the stress-strain curves obtainedthrough the experimental tensile test and the comparison of thedata obtainedwith the analytical and numerical methods. For the development of the analytical method, we proposed equations for the stress-strain curve of the material, using MS-EXCEL 2016. For the numerical method, a modeling of the test specimen was elaborated using the ANSYS Workbench® version 16 software. The steel selected for the studies was ABNT 1020.

ijaers doi crossref DOI:


Paper Statistics:
  • Total View : 45
  • Downloads : 17
  • Page No: 087-090
Cite this Article:
Show All (MLA | APA | Chicago | Harvard | IEEE | Bibtex)

[1] EVANGELISTA, Sérgio Henrique,2000. Diagrama de limite de conformaçãoaplicados a análiseporelementosfinitos de um processo de estampagememchapasmetálicas. 135f. Dissertação (Mestrado) – Universidade de São Paulo Escola de Engenharia de São Carlos, Mestradoem Engenharia Mecânica, São Paulo, 2000.
[2] RISITANO, A. et al, 2017. Fatigue assessment by energy approach during tensile tests on AISI 304 steel. Fracture and Structural Integrity, [S.l.], n. 39, p. Pages 201-215, dec. 2016. ISSN 19718993. Available at: . Date accessed: 30 set 2017. doi:
[3] K. Polaiah, Hemalatha. Naidu, P. Satheesh Kumar (2017).Friction Stir Welding of Similar Metals by Taguchi Optimization Technique -A Review. International Journal of Advanced Engineering, Management and Science(ISSN: 2454-1311),3(10), 0991-0994.
[4] B.S. Krishnamurthy, R. Balamuralikrishnan, Mohammed Shakil (2017).An Experimental Work on Alkaline Resistance Glass Fiber Reinforced concrete. International Journal of Advanced Engineering, Management and Science(ISSN: 2454-1311),3(7), 730-737.