Statistics

    Map

Twitter

The Most Economical and Optimal Solution for Trusses in Gaza Strip
( Vol-5,Issue-9,September 2018 )
Author(s):

Ali I. Tayeh

Keywords:

Steel; Howe roof truss; I section; Material cost.

Abstract:

Due to siege imposed on Gaza Strip since 2007 and the prevention of importing specific steel sections to the Strip. This situation has led to a change in standard steel prices. It is known that there is a direct correlation between the weight of steel sections and their prices i.e. heavier steel sections are associated with higher prices and vice versa. However, prices of steel sections in Gaza Strip are subject to change according to their availability. In other words, light steel sections can be more expensive than heavier ones. The major aim of this research is to investigate the best and most economical steel section to be used in Gaza Strip according to availability and local prices. Throughout this study, steel sections which are permitted to enter Gaza Strip have been used in this work such as L section, T section, I section, Square and Pipe sections. This research is a parametric study of different sections that can be used in the design of Howe roof truss subjected to vertical loads and later identifying the cheapest steel section to be used in Gaza, Palestine.

ijaers doi crossref DOI:

10.22161/ijaers.5.9.12

Paper Statistics:
  • Total View : 49
  • Downloads : 13
  • Page No: 111-116
Cite this Article:
MLA
Ali I. Tayeh et al ."The Most Economical and Optimal Solution for Trusses in Gaza Strip". International Journal of Advanced Engineering Research and Science(ISSN : 2349-6495(P) | 2456-1908(O)),vol 5, no. 9, 2018, pp.111-116 AI Publications, doi:10.22161/ijaers.5.9.12
APA
Ali I. Tayeh(2018).The Most Economical and Optimal Solution for Trusses in Gaza Strip. International Journal of Advanced Engineering Research and Science(ISSN : 2349-6495(P) | 2456-1908(O)),5(9), 111-116. http://dx.doi.org/10.22161/ijaers.5.9.12
Chicago
Ali I. Tayeh. 2018,"The Most Economical and Optimal Solution for Trusses in Gaza Strip". International Journal of Advanced Engineering Research and Science(ISSN : 2349-6495(P) | 2456-1908(O)).5(9):111-116. Doi: 10.22161/ijaers.5.9.12
Harvard
Ali I. Tayeh. 2018,The Most Economical and Optimal Solution for Trusses in Gaza Strip, International Journal of Advanced Engineering Research and Science(ISSN : 2349-6495(P) | 2456-1908(O)).5(9), pp:111-116
IEEE
Ali I. Tayeh."The Most Economical and Optimal Solution for Trusses in Gaza Strip", International Journal of Advanced Engineering Research and Science(ISSN : 2349-6495(P) | 2456-1908(O)),vol.5,no. 9, pp.111-116,2018.
Bibtex
@article {alii.tayeh2018the,
title={The Most Economical and Optimal Solution for Trusses in Gaza Strip},
author={Ali I. Tayeh},
journal={International Journal of Advanced Engineering Research and Science},
volume={5},
year= {2018},
}
Share:
References:

[1] American Institute of Steel Construction (ASIC), (2010a). Specifications for Structural Steel Buildings, Chicago, IL.
[2] American Institute of Steel Construction (AISC), (2010b) Steel Construction Manual, Chicago, IL.
[3] Carter, C. J., & Schlafly, T. D. (2008, March). $ave More Money. Modern Steel Construction.
[4] Chen, W., & Lui, E. M. (Eds.). (2005). Handbook of Structural Engineering. New York: CRC Press.
[5] Chen, W., & Lui, E. M. (Eds.). (2006). Principles of Structural Design. New York: CRC Press.
[6] Sanchita.S.Nawale, Sangram Chalukya, and Dr.S.V.Admane “Comparative Analysis and Bending Behavior of Cold form Steel with Hot Rolled Steel Section.” American Journal of Engineering Research (AJER) e-ISSN : 2320-0847 p-ISSN : 2320-0936 Volume-03, Issue-05, pp-255-261(2013)
[7] Thornton, W., & Lini, P. (2011, July). The Whitmore Section. Modern Steel Construction.