Statistics

    Map

Twitter

Analysis of Process Parameters in Wire EDM on D2 Tool Steel using Taguchi Method
( Vol-5,Issue-9,September 2018 )
Author(s):

Murahari M., Dileeplal J.

Keywords:

WEDM, MRR, SR, KW, S/N Ratio.

Abstract:

This paper focuses on the effect of input parameters like pulse on time, pulse off time, servo voltage, and kerf width on the output characteristics of CNC wire EDM process such as material removal rate (MRR), surface roughness (SR), and kerf width (KW). The optimum process parameters and corresponding output responses are found out using Taguchi Method. In this research, High carbon high chromium D2 tool steel is used as the work piece with 0.25mm brass wire as tool.

ijaers doi crossref DOI:

10.22161/ijaers.5.9.8

Paper Statistics:
  • Total View : 106
  • Downloads : 24
  • Page No: 075-078
Cite this Article:
MLA
Murahari M. et al ."Analysis of Process Parameters in Wire EDM on D2 Tool Steel using Taguchi Method". International Journal of Advanced Engineering Research and Science(ISSN : 2349-6495(P) | 2456-1908(O)),vol 5, no. 9, 2018, pp.075-078 AI Publications, doi:10.22161/ijaers.5.9.8
APA
Murahari M., Dileeplal J.(2018).Analysis of Process Parameters in Wire EDM on D2 Tool Steel using Taguchi Method. International Journal of Advanced Engineering Research and Science(ISSN : 2349-6495(P) | 2456-1908(O)),5(9), 075-078. http://dx.doi.org/10.22161/ijaers.5.9.8
Chicago
Murahari M., Dileeplal J.. 2018,"Analysis of Process Parameters in Wire EDM on D2 Tool Steel using Taguchi Method". International Journal of Advanced Engineering Research and Science(ISSN : 2349-6495(P) | 2456-1908(O)).5(9):075-078. Doi: 10.22161/ijaers.5.9.8
Harvard
Murahari M., Dileeplal J.. 2018,Analysis of Process Parameters in Wire EDM on D2 Tool Steel using Taguchi Method, International Journal of Advanced Engineering Research and Science(ISSN : 2349-6495(P) | 2456-1908(O)).5(9), pp:075-078
IEEE
Murahari M., Dileeplal J.."Analysis of Process Parameters in Wire EDM on D2 Tool Steel using Taguchi Method", International Journal of Advanced Engineering Research and Science(ISSN : 2349-6495(P) | 2456-1908(O)),vol.5,no. 9, pp.075-078,2018.
Bibtex
@article {muraharim.2018analysis,
title={Analysis of Process Parameters in Wire EDM on D2 Tool Steel using Taguchi Method},
author={Murahari M., Dileeplal J.},
journal={International Journal of Advanced Engineering Research and Science},
volume={5},
year= {2018},
}
Share:
References:

[1] Durairaj M., Sudharsun D. and Swamynathan N. (2013). Analysis of process parameters in wire EDM with stainless steel using single objective Taguchi method and multi objective grey relational grade, Procedia Engineering, 64, 868-877.
[2] Kumar K. and Agarwal S. (2011).Multi – objective parametric optimization on machining with wire electric discharge machining, International journal of Advanced Manufacturing Technology, 62, 617-633.
[3] Lia L, Guob Y. B., Weia X. T. and Lib W. (2013).Surface integrity characteristics in wire-EDM of Inconel 718 at different discharge energy, Procedia, CIRP 6, 220-225.
[4] Liao Y. S., Huang J. T., Chen Y. H. (2004). A study to achieve a fine surface finish in wire EDM, Journal of Materials Processing Technology, 149, 165-171.
[5] Manna A., Bhattacharya B. (2006). Taguchi and gauss elimination method: a dual response approach for parametric optimization of CNC wire cut EDM of PRAISiC MMC, International Journal of Advanced Manufacturing Technology, 28, 67-75.
[6] Meena K. L., Manna A.,Banwait S. S., Jaswanti (2013).Effect of wire feed rate and wire tension during machining of PR-AL-Sic -MMC's by WEDM, European Journal of Engineering and Technology, 1(1).
[7] Rozenek M.,Kozak J.,Daibrowski L., Ebkowski K.. (2001).Electrical discharge machining characteristics of metal matrix composites, Journal of Materials Processing Technology, 109, 367-370.