http://ijaers.com/ Open Access international Journal to publish research paper en-us August 2019 Being education a fundamental factor to generate the welfare of society, together with research, which is a consequence of the first, a form of application of education and knowledge. Being these elements, generators of the progress and welfare of society, which is specifically important in areas such as health, in which the requirement of quality increases every day, since it is a sector in the service sector in the what quality is not optional and, yes, imperative, because it is tied to the well-being and life of your client, or patient. Thus, the objective of this work is to carry out an exploratory bibliometric research on publications made on the quality tools used in the hospital environment, from 2002 to 2019. In order to fulfill the objective of this work, a survey of articles available in two large databases - Scopus and Web of Science - was carried out using key words from the theme: "Quality tools & Health", then applied filters to determine characteristics to respect of these works. As results, a survey of the quality tools used in the hospital environment was obtained, as well as some characteristics aimed at counting publications of the works over the years. http://ijaers.com/detail/the-importance-of-quality-tools-in-the-health-environment/ Samuel Martins Drei, Francisco Ignácio Giocondo Cesar, Paulo Sérgio de Arruda Ignácio http://ijaers.com/uploads/issue_files/1IJAERS-07201985-TheImportance.pdf Research assists in the creation of new tools, ideas, processes, among others that aim to facilitate progress and social management. Certain areas need some special attention, such as the health sector, which works to achieve maximum standardization of processes, enhancing quality, as the consequences of a failure can be fatal. Thus, to assist in these processes, the general objective of this paper is to analyze the concepts focused on Planning and Control in health environments. For this, a bibliometric survey of articles available in two large databases - Scopus and Science Direct - was performed using keywords of the theme: “Health & Care & Planning and Control”, between 2002 and 2019. Then, applied filters to determine the works that were, in fact, within the theme. Thus, a qualitative survey of the planning and control within the hospital scope and its characteristics was obtained. http://ijaers.com/detail/bibliometric-study-on-planning-and-control-in-the-health-environment/ Samuel Martins Drei, Paulo Sérgio de Arruda Ignácio http://ijaers.com/uploads/issue_files/2IJAERS-07201988-Bibliometric.pdf The Flipped Classroom methodology uses audiovisual products in general and video in particular as a means to make content available to students. In this study, we intend to verify and evaluate if there are significant differences in the retention of information mediated by the audiovisual products according to the type of resource that carries it. For this purpose we created eleven prototypes using the "Articulate Storyline ©" program. In these prototypes the information was presented exclusively in the following typologies of resources: i) Video; ii) Video, Audio and Text; iii) Video and Text, iv) Video and Audio; v) Image, Audio and Text; vi) Image and Text; vii) Image and Audio; viii) Image; ix) Audio and Text; x) Text; xi) Audio. In this study, the data revealed that the average levels of information retention mediated by the various typologies of resources were higher than 60%, either immediately after receiving the information or after eight days; and that the highest retention occurred when information is mediated through video, audio and text simultaneously with 92.31% and the lowest retention when information is only available through the 64.62% image. http://ijaers.com/detail/mediated-information-and-flipped-classroom-information-retention-level-assessment/ Armando Silva, Paula Quadros-Flores http://ijaers.com/uploads/issue_files/3IJAERS-07201998-Mediated.pdf This study aimed to evaluate the response curve of phosphorus fertilization to the development and productivity of Salvia hispânica L. in Cerrado soils in the South of Tocantins. The Chia seeds used in the experiments came from producers in the region of Katueté — Paraguay. The experiments were carried out in the experimental area at the Federal University of Tocantins, University Campus of Gurupi-TO, in the agricultural years 2014/2015 and 2015/2016, through a randomized block design with four repetitions. The treatments consisted of five levels of phosphorus fertilizer (0, 30, 60, 90 e 120 kg ha−1). At 120 days after emergence, the following characteristics were evaluated plant height, upper stem height, stem diameter, bunches number, length of bunches, and grain Productivity. The data were submitted to analysis of variance and regression at the 5% probability level by the F test. The analysis of the results showed that the doses of 30 and 60 kg ha−1 of phosphorus influenced positively in the most development and productivity in the culture of Chia in the harvest 2014/2015. The results also showed that increasing doses of phosphorus had not positive effects in the agronomic characteristics at the culture of Chia n the harvest 2015/2016. The maximum grains Productivity found in the isolated doses of P was superior to 157 kg ha−1. http://ijaers.com/detail/response-curve-of-salvia-hisp-nica-l-to-different-dosages-of-phosphorus-in-soils-of-the-cerrado/ Rodrigo Ribeiro Fidelis, Guillermo Arturo Herrera Chan, Wagner Augusto Rauber, Taynar Coelho de Oliveira Tavares, Marília Barcelos Souza Lopes, Kleycianne Ribeiro Marques, Pedro Raymundo Arguellles Osorio, Lucas Xaubet Burin, Danilo Alves Veloso, Liomar Borges de Oliveira, Patrícia Sumara Moreira Fernandes, Marile Alves Ramos dias, Manoel Mota do santos, Raimundo Wagner de Souza Aguiar http://ijaers.com/uploads/issue_files/4IJAERS-07201992-Responsecurve.pdf High precision machining is possible in present era because of non-conventional machining methods like EDM, WEDM, AJM, ECM and many more. In present research study, EDM method is applied to optimize the selective process parameters of EDM machine on high strength steel material EN-08. In present study, four process parameters are selected which are T-on, T-off, Current and Pressure. Each factor has four levels as per machine range. Pilot experiments are also performed to find the exact range of machining parameters. Pilot experiments are based on “One factor vary and others constant” concept. After pilot experiments, Design of experiment (DOE) method called Taguchi method is applied to find the minimum experiments for this research study. L-16 orthogonal array is selected for this research study. http://ijaers.com/detail/edm-process-parameter-analysis-and-optimization-using-cd-function-multi-objective-optimization-on-en-08-work-piece-material/ Prashant Kumar, Sulabh Nalwaya http://ijaers.com/uploads/issue_files/5IJAERS-0820196-EDMProcess.pdf Foster care is a legally recognized family-community alternative in Portugal, designed to protect and care for children in situations where their rights are under attack. With the intent of expanding our knowledge of the Portuguese experience, through an intercultural dialogue between Brazil and Portugal, this article allows us to problematize what has happened with the process of family reintegration of those under care. To this end, we have used the content analysis methodology proposed by Bardin. It was possible to see that Portuguese foster care has been a residual protective social response if compared to institutionalization and reintegration has proved itself to be a complex challenge. http://ijaers.com/detail/foster-care-and-reintegration-different-portuguese-similarities/ Rachel Baptista, Maria Helena Zamora, Eduardo Santos http://ijaers.com/uploads/issue_files/6IJAERS-07201983-FosterCare.pdf This paper aims to aid in the development of interactivity in virtual worlds, especially within the context of a virtual museum that serves the purpose of introducing its visitors to computing and basic electricity. We opted for the use of software agents with instructional and interactive purposes, which were personified as intelligent avatars serving as guides to a museum. This paper presents both a virtual 3D museum about the history of computing, developed using the OpenSimulator virtual worlds platform, where its 3D modeling and development tools were used with the help of scripts, as well as the focus of the project, which is the development of software agents. For the sake of achieving the objectives of this work, a research was conducted with a case study in order to verify whether the use of an intelligent agent in a virtual world can facilitate or support in the process of teaching and learning providing knowledge about the historical part of computing. The construction of this environment, integrated with an intelligent agent named AGIMC (the portuguese acronym for Intelligent Agent of the Museum of Computing) used the public web server pandorabots. To verify the feasibility of using the environment, a case study was carried out, which demonstrated that the use of these environments does contribute as a mean to support teaching, but there are also some technological limitations that may hinder its practical use in the educational context. An assessment was carried out with IFRS (Federal Institute of Rio Grande do Sul). The results obtained during the evaluation with the students met our expectations, obtaining good results and indications that the agent did support the student’s conception of knowledge in the discipline introduction to computing, despite some difficulties found in its implementation. http://ijaers.com/detail/the-impact-of-effective-communication-between-users-in-3d-collaborative-virtual-environments-the-conversational-agent-use-case/ Andreia Solange Bos, Michelle Pizzato, Valter Antonio Ferreira, Madeleine Schein, Milton Antônio Zaro, Liane Tarouco http://ijaers.com/uploads/issue_files/7IJAERS-07201987-TheImpact.pdf Currently, the world's energetic matrix is in a modification, resulting from the worsening global warming. In this scenario, Brazil presents the generation of electric energy through Hydro consolidated, as well as the ethanol in gasoline replacement in vehicles. This biofuel is produced from the ethanolic fermentation of sugar cane juice or residual molasses of sugar manufacturing. With the high marketing of "flex-fuel" cars in the country, it is estimated that the demand will increase considerably, being necessary to the expansion of sugar cane plantations, or the use of other raw materials that can complement the production. In this context, the sweet sorghum outstands, which have been studied by presenting short vegetative cycle, high-yield in ethanol per area, co-generation from bagasse burning, the possibility of mechanization, besides being cultivated in sugar cane plantations renewal areas. Considering that sweet sorghum is a relatively new crop, there is a lack of information in the literature concerning the ethanol production process. In this sense, one can cite even the behavior of different strains of yeasts in the ethanolic fermentation of sweet sorghum juice and the characteristics of the resulting wine. In this way, the objective of this work was to assess the influence of yeast strains PE-2 and BG-1 in the must fermentation process of sweet sorghum, it was observed that the raw material offers levels of sugars suitable for industrial processing, and the PE-2 adapt more easily to the must sweet sorghum than the BG-1, producing high alcoholic content. http://ijaers.com/detail/influence-on-the-productivity-of-ethanol-by-two-strains-of-yeasts-in-must-fermentation-of-sweet-sorghum/ Raúl Andres Martinez Uribe, Gustavo Henrique Gravatim Costa, Márcia Justino Rossini Mutton, Patrícia Chiara Silvério, João Henrique Chiara Silvério http://ijaers.com/uploads/issue_files/8IJAERS-07201978-Influenceon.pdf Researches focused on identifying the factors that influence the implantation of wind farms have been found in the academic scope, considering the technical, environmental, economic and social points. The objective of this study is to map the scientific activity based on the theme "factors that influence the implementation of a wind farm", using in principle the entire period of coverage of the Web of Science - WOS platform, in order to compose a portfolio of bibliographical references on the subject. The process selected 9 relevant articles, aligned to the theme and present in several areas of study. A qualitative bibliometric analysis of the portfolio was also carried out in order to characterize and analyze the selected articles, also elaborating a SWOT Matrix with positive and negative factors on the researched topic. http://ijaers.com/detail/wind-farm-implementation-factors-a-bibliometric-analysis/ Vanielle Aparecida do Patrocinio Gomes, Rodrigo Randow de Freitas http://ijaers.com/uploads/issue_files/9IJAERS-07201957-WindFarm.pdf The objective of this article was to review the aspects related to the biomechanical variables that influence human gait and to understand how the ground reaction forces act during the process of ambulation. The research was made through Scopus and Google Scholar database and the key words used were: "gait", "children", "walk" and "ground reaction forces". Gait evaluation is used in many fieldsto make diagnoses, recommend interventions and monitor their effect. Muscle recruitment, immature stride dynamics and, strategies of equilibrium control, immature sensory integration during stance, are some of various biomechanical and neural factors related to the kinetic pattern of walking in children. There are different biomechanical parameters and methodologies applied to analyze the gait pattern in children, and severalstudies have addressed medical treatments and their influence in the gait parameters. Therefore, the study of the relationshipbetween biomechanical variables and the gait maturity of the children is important to the development of new treatments and interventions in this population. http://ijaers.com/detail/ground-reaction-forces-during-the-biomechanical-gait-analysis-in-children/ Leandro D. de Souza, Andréia G. Aires, Rafael R. Baptista http://ijaers.com/uploads/issue_files/10IJAERS-07201959-GroundReaction.pdf Light Detection And Ranging (LiDAR) is a technology that arose in the last years as one of the best technologies to capture tridimensional information about features on the Earth´s surface. LiDAR measurements can be carried out over the ground in a static mode, with the scanner fixed on a tripod. This mode is known as Terrestrial LiDAR. LiDAR measurements can also be acquired in a kinematic mode when the scanner is assembled and transported on aircrafts, cars, boats and even in special vehicles that operate in underground mines and galleries. That second mode is called Mobile LiDAR where the LiDAR scanneris connected to an Inertial Navigation System (INS) and a dual frequency GNSS receiver that respectively provide the orientation and the position of a platform and consequently the direct georeferencing. This paper focus is to compare results obtained from data collected over the same area in both scanner modes but with uncertainties. This study has used both terrestrial and mobile LiDAR scanners to generate a 3D model of the terrain of a chosen area and to calculate the volume above a predefined reference plane. The same volume was estimated with a conventional topographic technique that uses collected points in the same area using RTK - GNSS receivers. http://ijaers.com/detail/compatibility-evaluation-of-point-clouds-acquired-with-terrestrial-and-mobile-lidar-scanners/ Dr. Mauro Menzori, Dr. Christian Larouche http://ijaers.com/uploads/issue_files/11IJAERS-07201999-Compatibility.pdf Biological Risks are defined by the existence of the probability of occupational exposure to Biological agents in functions that involve the use or manipulation of the biological agent as the main object of the work. This exposure without adequate protection causes health hazards, such as acquiring some occupational disease due to microorganisms present in the workplace. Thus, this work aims to conduct a descriptive research of the environment of the effluent treatment plant unit in Manaus-AM to verify which agents are present and which preventive measures are taken to eliminate or reduce these risks, ensuring a healthy environment. to the employee. The obtained result fits within the acceptable standards, being in agreement with the theoretical reference present in this work, but it needs a deeper analysis in the subject to prove that these biological agents do not cause more serious health damages. http://ijaers.com/detail/biological-risk-analysis-in-a-waste-treatment-company-in-manaus-am/ Patrick Hozannah de Albuquerque, Eduardo de Magalhães Braga, Diego Leitão Mascarenhas, David Barbosa de Alencar, Manoel Henrique Reis Nascimento, Jorge de Almeida Brito Junior http://ijaers.com/uploads/issue_files/12IJAERS-07201993-Biological.pdf Way Samal river is one of the rivers in district of Central Maluku which is intended for agricultural activities. But when its rainy season, there are many problem caused by overflowing of river Way Samal. So, we need to find the right solution to overcome this problem. In general the best solution is technical engineering, by planning the building control and normalization of the river. It needs to be analyzed how much flood discharge that occurs in the Way Samal river flow. In this study a flood discharge planning analysis was conducted using annual maximum rainfall. This rainfall is analyzed for rainfall plans by using probability distributions Gumbel, Normal, Log-Normal, and Log-Pearson Type III. Furthermore, the distribution is tested for compatibility by using Chi-Square test and Kolmogorof Smirnov Test. After that based on the match test results, the design flood discharged was calculated by using the synthesis hydrograph method of Snyder and Nakayasu. Then these two synthesis methods are compared and select the closest to trend based on the linear average approach. http://ijaers.com/detail/analysis-of-flood-discharges-on-way-samal-river-in-moluccas-province/ Selviana Walsen http://ijaers.com/uploads/issue_files/13IJAERS-07201961-Analysisof.pdf The concept of "smart city" has become more present in academic literature and public policy in recent years, due in large part to the growing importance of cities in the global context. For the first time in history, most of the global population lives in cities. Although they represent only 2% of the world's surface, urban areas consume more than 70% of the world's total resources. As a result of rapid population growth, cities are facing challenges that lead them to seek innovative approaches to management and organization. City managers need indicators to measure performance in providing services and improving the quality of life for the population, assessing the development of local public policies and benchmarking with other cities. It should be noted that to meet this need there was an expressive appearance of city rankings, but many of them focus only on the final result and do not present a clear methodology. In addition, the availability of open, standardized and up-to-date city data is a challenge. The objective of this article is to present a comparative analysis between two rankings of smart cities: the European ranking of European Smart Cities and the Brazilian ranking Connected Smart Cities. An exploratory study was carried out with bibliographical research on the theoretical concepts of intelligent cities, rankings and measures of city performance. A case study in the cities of São José dos Campos (Brazil) and Toulouse (France) was also carried out. The present study found that the analyzed rankings show convergences in most of their indicators. The European ranking has more academic characteristics and provides a more in-depth analysis of the data of the cities, and the choice of indicators for both rankings reflects the current situation of each region analyzed with regard to its development. http://ijaers.com/detail/analysis-of-the-european-and-brazilian-rankings-of-smart-cities-a-case-study-of-s-o-jos-dos-campos-and-toulouse/ Jair Gustavo de Mello Torres, NeusaMaria de Andrade, Pedro Luiz de Oliveira Costa Neto http://ijaers.com/uploads/issue_files/14IJAERS-07201996-Analysisof.pdf From the goodness of internal combustion engines as primary drive They Have Been Increasingly more widespread in power generation, either isolated power plants in the working system-based systems. Engines of large size and Especially the Internal Combustion engine (IC), Increasingly are Becoming more widespread in the generation of electricity by the degree of perfection That is Increasing, however in the the powers of these Also higher, costs of parts que make it up, and done maintenance activities engines Become more expensive, for that reason the consideration During the exploitation is to monitor the operation of the same, in real time. In this article Describes some of the characteristics of the great internal combustion engine and indications. http://ijaers.com/detail/efficiency-of-the-engine-of-great-porte-and-detection-of-anomalies-in-the-operation-of-the-piston-cylinder-system-through-the-monitoring-in-real-time/ Alarico Gonçalves Nascimento Filho, Tirso Lorenzo Reyes Carvajal, Jandecy Cabral Leite, Manoel Henrique Reis Nascimento, Jorge Almeida Brito Junior, Carlos Alberto Oliveira de Freitas, Rafael Teles Rocha http://ijaers.com/uploads/issue_files/15IJAERS-0820194-Efficiencyof.pdf Introduction: Stress is defined as feedback from the body in the face of psychophysiological stress. It can cause major health problems to the individual, directly affecting their quality of life in different ways, for there are some validated tools to detect symptoms and make their diagnosis. Objective: To point out instruments used to diagnose stress and to describe their differences. Methodology: Article conducted through systematic review, including studies that had greater relevance in their information and were related to health, and excluded those who escaped the proposed theme. In all, 32 sources were used, published between 1956 and 2019, thus covering initial stress research and more recent studies. Results: After searching the literature we found 8 validated instruments to diagnose stress, highlighting a translated version of 2017 of Stress Assessment in Nursing Students being the most current. Discussions: Stress is considered a disharmony situation of the organism, with adaptive responses that can be specific to the stressor and highly generalized. The importance of early diagnosis made by psychologists was highlighted, as well as the use of strategies to mitigate the effects of this disease. Conclusion: The means to diagnose stress are diverse, as stressors, so health professionals should be aware of all signs of stress experienced by both nursing students and trained nurses. http://ijaers.com/detail/instruments-for-diagnosing-stress-in-nursing-professionals-and-academics-a-systematic-review/ Krislayne Veras Alexandre, Leonardo Moreira Rabelo, Gabriela Meira de Moura Rodrigues http://ijaers.com/uploads/issue_files/16IJAERS-07201997-Instrumentsfor.pdf The evolution of the ceramic systems increasingly seeks to meet the aesthetic and functional needs of the restorations, providing composites with greater tenacity, translucency and resistance to traction and flexion, increasing the longevity of the restorations. Concomitantly with the development of restorative materials and minimally invasive techniques, professionals combine digital tools to improve visualization of aesthetic problems, create possible solutions and accurately guide clinical and laboratory procedures to achieve predictable results. Thus, in this case report we aimed to describe the changes in facial expression, through ultrathin ceramic laminates in patients with the main complaint of dissatisfaction with the aesthetic appearance of their smile. The team of professionals followed all the clinical steps required, from digital planning, restorative testing, mock up, the choice of material and the cementation of the restorations. In this way, it was possible to obtain satisfactory aesthetic results, through the choice of a highly personalized treatment, with adequate materials and planning the patient's needs. http://ijaers.com/detail/aesthetic-rehabilitation-with-ultra-thin-ceramic-veneers-case-report/ Jopson Queiroz de Almeida, Frederico Augusto Peixoto Silva, Jenival Correia De Almeida Júnior http://ijaers.com/uploads/issue_files/17IJAERS-07201994-Aestheticrehabilitation.pdf Considering the difference in the efficiency of direct selling and e-commerce online sales, this paper takes the manufacture-led dual-channel supply chain as the research object and takes no fair concern as the benchmark to analyze the influence of network marketing efficiency and fair concern mode on the pricing decision of dual-channel supply chain. The research results show that: with the improvement of the network sales efficiency of manufacturers, under the non-dual-member equity concerns (N, M and R modes), both the selling price of e-commerce and the direct selling price of manufacturers will be reduced, and the price reduction rate of manufacturers is faster than that of e-commerce. Under the dual-fair concern (MR) model, the selling price of e-commerce will be reduced, but whether the direct selling price of manufacturers will be reduced depends on the degree of fair concern of both sides. The leading party's equity concern will reduce the impact of network sales efficiency on price reduction, while the follower's equity concern will enhance the impact of network sales efficiency on price reduction. In addition, the influence of network marketing efficiency on price reduction and speed reduction of manufacturers in MR mode is simulated. http://ijaers.com/detail/dual-channel-supply-chain-pricing-decisions-under-network-sales-efficiency-and-equity/ Mei-xiang Wu, Cheng-dong Shi, Qiang Sun http://ijaers.com/uploads/issue_files/18IJAERS-0820195-Dual-channel.pdf Among the products that can generate consequences to the environment is the residues of vegetable oils, generated daily in the preparation (fried) of food. The lack of information and knowledge on the part of establishments, industries and people, causes many to dispose improperly. Starting from the initial assumptions, this research originated from the discussions in the discipline of waste management of the higher course of food Technology of the Federal Institute of Sertão Pernambucano – Petrolina campus, and had as objective to make a brief Analysis, on how is the knowledge of the employees of the institution about the themes "waste management", "recycling" and "environmental conservation" and the real importance of formal and non-formal environmental education, aiming to bring sensitization Environment for the internal sectors of the Higher Education Institution (HEI), enabling a prior knowledge of the risks caused to nature and humanity, with actions inadequate to the environmental. This is an applied, quantitative-qualitative, exploratory and field nature, where data collection was obtained from the on-site visit, questionnaire application and systematic observation. Therefore, the results of the research showed that in the sectors surveyed people are aware of the consequences caused by oil residues, where they affirm that they give the correct destination in the form of waste recycling. http://ijaers.com/detail/waste-management-at-the-federal-institute-of-sert-o-pernambucano-brazil-environmental-education-as-a-tool-for-environmental-conservation/ Keicy Layane R. Simplício, Elizamar Luna, Renata Cibelle G. A. Lima, Clecia Simone G. R. Pacheco, Reinaldo Pacheco dos Santos http://ijaers.com/uploads/issue_files/19IJAERS-0820199-WasteManagement.pdf The present study aims to understand the teacher training and pedagogical assistance processes in distance education (EaD). The study is a bibliographic research based on some authors, the current legislation on the distance education, among others. We identified that the distance teacher training has legal protection, which legitimizes, organizes and operationalizes its action in Brazil. Through didactic-methodological mediation and the use of TIC, it is possible to overcome the distance in the time and space in which the distance formative processes take place. Furthermore, the knowledge acquisition is possible in the Virtual Learning Environment, when the tutor, as mediator of the learning process stimulates and challenges students to reflect and build their knowledge individually or collectively with their colleagues in this cyberspace training. Through the proposed reflections, the present study contributes to understanding the distance education for teacher training, besides the criticisms that this education model receives in the educational scenario. http://ijaers.com/detail/teacher-training-and-pedagogical-assistance-in-distance-education/ Ágata Laisa Laremberg Alves Cavalcanti, Antonia Dalva França-Carvalho http://ijaers.com/uploads/issue_files/20IJAERS-0820192-TeacherTraining.pdf The objective of this work was to analyze the effects of different organic substrates, fertigated with effluents from biodigesters in the production of coriander. The experiment was carried out in a greenhouse, greenhouse type. It was used a completely randomized design, with three replications, in a 2x2x2 factorial arrangement, being: cultivars (king and tabocas); substrates (natural, fermented) and source of irrigation (water, biofertilizer). The size of the plants were evaluated; number of stems and yield of green mass. No significant effect was observed between the organic substrates and the coriander cultivars for any of the analyzed variables, however, regarding the irrigation source, statistical significance was observed for the variables plant size and green mass yield, and the best means were obtained when the plants were irrigated with water. It is concluded that organic substrates and coriander cultivars studied are recommended for cultivation. However, the use of concentrated biofertilizers did not increase coriander production, and more research is needed to recommend the best doses of this biofertilizer. http://ijaers.com/detail/production-of-coriander-coriandrum-sativum-l-in-organic-substrates-and-fertigation-with-biodigester-effluents/ Jocélio dos Santos Araújo, Armando Lopes de Brito Filho, Klara Cunha de Meneses, Renata Santos Coutinho, Ismael dos Santos Cabral, Edna Mendes Fortes, Rosane Claudia Rodrigues, Michelle de Oliveira Maia Parente, Henrique Nunes Parente, Ana Paula Ribeiro de Jesus, Jardel Oliveira Santos http://ijaers.com/uploads/issue_files/21IJAERS-08201910-Productionof.pdf Naval machinery is designed to ensure proper operation of a ship and includes pumps, compressors, tanks, piping and other equipment. In modern vessels, the operation of this equipment is automated through Programmable Logic Controllers (PLC). In general, the development of PLC control software takes place in parallel with the mechanical construction of the vessels, so that integration tests are performed only at the time of commissioning. In order to reduce the risks associated with integration, the tests are performed by comparing the control software against a real-time simulator of the plant to be controlled. The contribution of this work is the development of a commissioning solution for the longitudinal compensation system of a submarine-based in a virtual simulation environment called Hardware-in-the-Loop (HIL). A HIL simulation refers to a system in which parts of a pure simulation have been replaced with actual physical components. The results were considered satisfactory since the test platform allowed the early identification of errors in the PLC software, tests of different control strategies and finally the possibility of the use for the purpose of operator training. http://ijaers.com/detail/hardware-in-the-loop-emulation-of-a-control-and-longitudinal-compensation-system-of-a-submarine/ Fabio Olival Monfre, Cesar da Costa http://ijaers.com/uploads/issue_files/22IJAERS-08201911-Hardware-in-the-loop.pdf The existing condition of Muara Teweh-Puruk Cahu road section with ± 100 km long is mostly uphill and bend that currently is experiencing significant damage. This study aims to determine the type of damage in Muara Teweh-Puruk Cahu road section and to analyze the correlation between damage and vehicle speed on flat roads and hilly terrain. The study was conducted by collecting primary data in the form of data of road damage, vehicle speed, and road geometric. Data analysis of road damage is done by the BinaMarga method to obtain the type of damage. The correlation between road damage and vehicle speed is shown in a regression model. The results of the analysis show the vehicle speed will tend to decrease as the increasing number of road damage. The speed of light vehicles on roads with flat terrain shows a very strong correlation with the type of damage, such as cracks, grooves, and depression. The speed of light vehicle going uphill shows a very strong correlation with the type of damage, such as cracks, grooves, potholes, and depression. Meanwhile, when the vehicle goes downhill, it is seen a strong correlation with the types of damage such as cracks, grooves, and depression. The speed of heavy vehicles on roads with flat terrain shows a very strong correlation with the type of damage like cracks, grooves, potholes, and depression. The speed of heavy vehicle when going uphill shows a very strong correlation with the type of damage like cracks, grooves, potholes, and depression. Meanwhile, when the vehicle goes downhill, it is shown a very strong correlation with the types of damage like cracks, grooves, and depression. http://ijaers.com/detail/the-analysis-of-road-condition-on-the-performance-of-muara-teweh-puruk-cahu-road-section/ Frans Levi Emanuel, Dr. Ing. Puguh Budi Prakoso, M. Arsyad http://ijaers.com/uploads/issue_files/23IJAERS-08201914-TheAnalysis.pdf Bryophytes were collected from a Cerrado fragment, located in the municipality of Caxias, Maranhão/Brazil. In the study area, 175 bryophytes were distributed in 12 families (10 mosses and two liverworts), 17 genera (15 mosses and two liverworts) and 23 species (21 mosses and two liverworts). Sematophyllaceae was the most representative family with four species (Trichosteleum subdemissum, Microcalpe subsimplex, Brittonodoxa subpinnata, and Taxithelium planum), followed by Dicranaceae, Fissidentaceae, and Pottiaceae with three species each. The species of bryophytes in the researched area colonized substrates, such as corticolous, terrestrial, rupicolous, epixylics and casmofites. The table shows the families, species, phytogeographic domains in Brazil and colonized substrates. http://ijaers.com/detail/bryophytes-in-maranh-o-brazil-a-new-area-a-new-species-list/ Maycon Adams da Silva Bonfim, Ronison Ferreira Oliveira, Regigláucia Rodrigues Oliveira, Gustavo da Silva Gomes, Maria de Fátima Veras Araujo, Maria Lindalva Alves da Silva, Janilde de Melo Nascimento, Guilherme Sousa da Silva, Domingos Lucas dos Santos-Silva, Jailson Costa Gaspar, Dominga Hosanira Silva de Sousa, Alex Medeiros Silva, Paula Regina Pereira Martins, Gonçalo Mendes da Conceição http://ijaers.com/uploads/issue_files/24IJAERS-07201933-Bryophytes.pdf Science, Technology and Innovation (ST&I) has the power to disrupt the old and consolidated political, social, cultural and economic paradigms of society. For effective ST&I actions to take place in a society, the participation of the business sector, ST&I institutions and, above all, the constituted public administration is necessary. This experience report aims to describe the process used to create and implement the ST&I municipal system. A case study was carried out in Campina Grande, one of the largest and most developed municipalities in the interior of Brazil. The results of the study indicate that the integration between the public administration, business and academic sector as well as the effective participation of the ST&I institutions was essential for the creation of a legal ordering for ST&I that would meet the specificities of the municipality in question. http://ijaers.com/detail/creation-and-implementation-of-a-municipal-science-technology-and-innovation-system-an-experience-report/ Lucas Ribeiro Novais de Araújo, Danyllo Albuquerque, José Nilton Silva, Rijkaard Dantas de Santana, Morganna Karolinne Lúcio Alves Tito, Raquel Barros Leal http://ijaers.com/uploads/issue_files/25IJAERS-08201923-Creationand.pdf A seed of chia (Salvia hispânica L.) has been growing, assuming significant values of consumption in the current society, due to its high nutritional power. However, its seeds can be targeted by the presence of fungi. The aim of this study was to evaluate the health, pathogenicity, and transmission of fungi associated with seeds in chia culture in the southern Tocantins. For the work, chia seeds were collected from the UFT experimental unit, Gurupi-TO, produced from the combination of five levels of phosphate fertilization (0, 30, 60, 90 and 120 kg ha-1) and five levels of nitrogen fertilization, 30, 60, 90 and 120 kg ha-1). The filter paper method (blottertest) was used to perform the mycobacterial survey.The pathogenicity and transmissibility of fungi associated with seeds were also tested. The genus detected in the superficial part of the seeds were: Cladosporiumsp., Phoma sp., Fusarium sp., Alternaria sp. and Curvularia sp. The chia seeds of the municipality of Gurupi-TO presented low incidence of fungi. There was no pathogenicity and transmissibility of the fungi detected in chia seeds in the seedlings. http://ijaers.com/detail/sanity-pathogenicity-and-transmission-of-fungi-associated-with-seeds-of-chia-coming-from-the-southern-region-of-tocantins/ Guillermo Arturo Herrera-Chan, Pedro Raymundo Argüelles-Osorio, Dalmarcia de Souza Carlos-Mourão,Gil Rodrigues Dos-Santos, Taynar Coelho de Oliveira-Tavares, Marília Barcelos Souza Lopes, Lucas Xaubet Burin, Wagner Augusto Rauber, Damiana Beatriz da Silva, Natan Angelo Seraglio, Raimundo Wagner de Souza Aguiar, Danilo Pereira Ramos, Natalia Silva Oliveira, Rodrigo Ribeiro-Fidelis http://ijaers.com/uploads/issue_files/26IJAERS-08201912-Sanity.pdf The present study analyzed the clinical and epidemiological aspects of leprosy cases in children under 15 years of age, in the State of Rondônia, from January 1, 2011 to December 31, 2015. It is an epidemiological research of the type Cross - sectional retrospective cross - sectional study, based on quantitative data extracted from the Information System of Notifiable Diseases Database (SINAN) of the Health Surveillance Agency of the State of Rondônia (AGEVISA - RO). During the study period, Rondônia diagnosed 260 cases of leprosy in children under 15, corresponding to 6% of the total cases in the state. 72.30% were aged between 10 and 14 years. The prevalence was males with 54.6% of the cases. The year of greatest detection was 2013 with 68 cases. The most frequent operational classification was multibacillary with 51.15%. Residents in urban areas accounted for 75.38%. Of the 52 municipalities in Rondônia, 69.23% detected cases of leprosy in children under 15 years of age. The most prevalent clinical form was Dimorphic with 43.07%. In the neurological evaluation of the patient at the time of diagnosis, 86.92% had zero degrees of disability, 75.7% had no affected nerves at the time of diagnosis, 62.69% had Bacilloscopy, had a negative result, 39.41% entered Services by spontaneous demand. 86.15% were discharged for a cure, and 72.30% were discharged from service with a zero degree of disability. Despite its decrease, the coefficient of detection of leprosy in children under 15 years of age in Rondônia maintains a very high level of endemicity and demonstrates difficulty in controlling the disease by the health authorities. http://ijaers.com/detail/clinical-and-epidemiological-aspects-of-leprosy-cases-under-15-years-of-age-in-the-state-of-rond-nia-in-the-period-2011-to-2015/ Carla Cristina dos Santos, Wanderlei Ruffato, Vagno Rodrigues de Lima, Rosilene Rufato, Marcuce Antonio Miranda dos Santos, Leonardo Severo da Luz Neto, Helio Franklin Rodrigues de Almeida http://ijaers.com/uploads/issue_files/27IJAERS-0820198-Clinicaland.pdf In the experimental statistic it is necessary to determine, after performing an experiment, which treatments differ wich other. In this context, Bayesian tests pbayes and dbayes allow the identification of these differences for data with or without balancing and for valid or not variance analysis hypotheses. The implementation of these tests in the context of completely randomized designs has already been performed in code R. Due to the importance of these tests, their extension to other designs is of great relevance. The purpose of the work is to expand them to a randomized block design. The implementation of the tests in R code for the randomized block design was successful. The programming was validated with three experiments: data with valid variance analysis assumption, balanced heterogeneous data and unbalanced data. The results were satisfactory, presented higher or equivalent sensitivity to traditional tests, evidencing the importance and versatility of pbayes and dbayes tests. http://ijaers.com/detail/implementation-of-bayesian-tests-pbayes-and-dbayes-for-randomized-block-design-in-r-code/ C. H. Ramos, F. A. Araújo, P. C. R Andrade http://ijaers.com/uploads/issue_files/28IJAERS-08201913-Implementation.pdf The research aims at the actions developed within the school, showing the importance of the social formation aspect in the educational process of the student. The objective of this study was to diagnose the performance of the school in the social formation of high school youth in the municipality of Santa Teresa. The sample was probabilistic, applying questionnaires to students and teachers in four high schools in the municipality of Santa Teresa. The results revealed that the paradigms used have low performance in the social formation of students. Even considering the importance of the school in the formation of the young person, with respect to the personal relationship, behavior, attitudes and values in the family, social and school environment, we observe that it does not reach its objectives. We conclude that the school is not managing to lead young people to the standard demanded by the educational culture that aims at learning in other domains, with low performance in the social formation of young people of the municipality. http://ijaers.com/detail/the-school-s-role-in-the-social-training-of-young-people-in-high-school-in-the-municipality-of-santa-teresa-e-s/ Marcus Vinicius Sandoval Paixão, Helio Pena de Faria Júnior, Frederico César Ribeiro Marques, José Julio Garcia Freitas, Charles Moreto, Polyana Pulcheira Paixão http://ijaers.com/uploads/issue_files/29IJAERS-08201915-TheSchool.pdf This work aims to describe an experimental procedure for the synthesis of bioethanol by the alcoholic fermentation of organic matter, from the use of discarded fruits. Based on the procedures performed on the statistical analysis of factorial experiments was used to verify the influence of the independent variables: the amount of must and fermentation time, in relation to yield response. The alcoholic fermentation was obtained from the pulp of apples (Malus communis) and tangerines (Citrus reticulata), as well as by microorganism (Saccharomyces cerevisiae). As a result, the maximum yield value was around 17.5% v.v-1, which gives fruit residues a high potential for use in bioethanol production. The statistical evaluation was used to optimize the input condition and the value of 19.06% v.v-1 has been estimated. Thus, this text presents a model of economic viability and its environmental importance due to the use of organic waste. http://ijaers.com/detail/bioethanol-production-and-statistical-modeling-from-fruit-residual-biomass-potential/ Rhuan C. M. Ribeiro, Matheus S. Viana, Glauber T. Marques, Paulo C. Santos Júnior, Pedro S. S. Campos, Otavio A. Chase, J. Felipe Almeida http://ijaers.com/uploads/issue_files/30IJAERS-08201920-Bioethanol.pdf The riverside communities of the municipalities of Sobradinho, Casa Nova, Pilão Arcado, Remanso and Sento-Sé in the State of Bahia have suffered socio-environmental and cultural impacts because of construction of hydroelectric dams on the São Francisco River, causing psychosocial damage to people, in addition to some environmental degradation. The main goal of this paper is to describe from memory the process of relocation of the residents of the old Sento-Sé village to the new city after the construction of the Sobradinho dam (1973). This way, it is intended to recount a historical reminiscence, recalling a socio-environmental and cultural context of the time of the flooding of this city that no longer exists tangibly. In the preparation of this article, semi-structured interviews have been conducted, based on reconstructed memories and reminiscences of the residents of that city, periodicals, documents from institutional sources and photographic images of the flood period. This research also produced a memorial record, a video-documentary called “Ecologia e Memória de Sento-Sé”, recorded in 2019 and available on YouTube, referring to a period in the history of the São Francisco Valley. http://ijaers.com/detail/the-construction-of-the-sobradinho-dam-and-the-relocation-of-the-residents-of-velha-sento-s-to-nova-sento-s-bahia/ Adzamara Rejane Palha Amaral, Juracy Marques dos Santos http://ijaers.com/uploads/issue_files/31IJAERS-08201918-Theconstruction.pdf The management problem of the New Product Development Project Process (PDNP) is recurrent in the literature, as it reflects a question that exists in R&D companies, which is to decide which product project portfolio which will minimize the necessary development costs while maximizing the return for the organization. In this context, the present study aims to use two multi-criteria approaches - TOPSIS and PROMETHEE II - using the Analytic Hierarchy Process (AHP) method to establish, in a non-partial way, the weights and to determine which approach yields the best profit for NPDP, and raise the question of which approach is most appropriate for this problem. In addition, a practical example was proposed that shows the impact between the different orderings present in the work, to assist in achieving the goal. As a result, it was possible to obtain a study in which the non-compensatory approach is better for the practical example, making the present work the beginning of deeper studies on the subject. http://ijaers.com/detail/a-multi-criteria-approach-to-the-problem-of-managing-the-new-product-development-project-portfolio/ Samuel Martins Drei, Thiago Augusto de Oliveira Silva http://ijaers.com/uploads/issue_files/32IJAERS-08201922-Amulti.pdf Analytical solution of Laplace equation using variable separation method, consists of two velocity potentials. However, only one component has been used. This research used both velocity potential equation components. With the potential equation, water wave surface equation and the related wave constants were formulated using kinematic free surface boundary condition and surface momentum equation. The characteristic of water wave surface that was produced was observed, both in deep water and shallow water. http://ijaers.com/detail/water-wave-modeling-using-complete-solution-of-laplace-equation/ Syawaluddin Hutahaean http://ijaers.com/uploads/issue_files/33IJAERS-08201919-WaterWave.pdf Since the advent of the Lava Jato operation, the term compliance has acquired a hitherto unknown popularity. Although it has been related to criminal guardianship, it takes care of a perfectly possible strategic management in the most diverse branches of law. In this study, the compliance is approached within the environmental sphere, as an instrument of feasibility and effectiveness of legal norms and practices in favor of environmental protection. Much is questioned whether the practice of compliance is mandatory or to what extent would be of great value for the development and business performance. In the environmental aspect, the research demonstrates that the preventive nature of this governance technique can bring current and future benefits. In addition, there is, implicitly, the approach to the concept of sustainability within the objectives described by the United Nations. To carry on this study, a bibliographic research was developed, based on selected scientific articles, as well as Brazilian doctrine and legislation pertinent to the theme. The achieved results of the research demonstrated that applicability of compliance practice in the environmental matters can be adopted in view of its preventive nature. http://ijaers.com/detail/environmental-compliance-search-for-effectiveness-in-the-application-of-environmental-standards/ Priscila Elise Alves Vasconcelos, Rafael Carvalho Rezende Oliveira, Paulo Sergio Vasconcelos http://ijaers.com/uploads/issue_files/34IJAERS-08201924-Environmental.pdf Analyze parental alienation and their emotional and legal implications is of fundamental importance for understanding the family dynamics and a possible appearance of complications. This study is a qualitative type of research literature review. It can be said that one of the major consequences of parental alienation is the emergence of the syndrome, as occurred compromise the child's healthy development. One of the study objectives is to assist families that pass in some way by a separation process in an attempt to prevent the installation of parental alienation; Whereas once implemented, the distance and the breakdown of the relationship between the alienated parent and child, the reconstruction of these family ties will require a long time. At work we try to clarify some key points in the process as differences between the sale and the syndrome; its stages; consequences; his guard and modalities of the Brazilian Law. http://ijaers.com/detail/parental-alienation-psychological-and-legal-implications/ Luiz Carlos Cavalcanti de Albuquerque, Beatriz Johnson Avelino, Tauana Cristina Santana, Leonardo Severo da Luz Neto, Helio Franklin Rodrigues de Almeida, Fátima Maia Queiroga http://ijaers.com/uploads/issue_files/35IJAERS-0820197-ParentalAlienation.pdf This paper mainly focuses on the impact of input parameters like feed, spindle speed, axial depth of cut, and radial depth of cut on the output characteristics of CNC milling process of aluminium 2219. Material removal rate, surface roughness, and flatness are taken as the performance measures. The optimum process parameters and corresponding output responses are found out using Taguchi analysis. The multi-objective optimization based on grey relational analysis is used to attain maximum material removal rate simultaneously with minimum flatness and surface roughness. ANN models were developed using back propagation algorithms to predict the performance characteristics. http://ijaers.com/detail/analysis-of-machining-parameters-on-cnc-milling-of-aluminium-2219/ Midhun M., Dileeplal J. http://ijaers.com/uploads/issue_files/36IJAERS-08201927-Analysisof.pdf Harmful drug use by women is a growing problem. The objective of this study was to identify and discuss the relationship between gender inequality and the factors that lead women to abuse psychoactive substances, as well as the difficulties encountered in performing the treatment. This is a qualitative study, in which a semi-structured interview was conducted with seven women undergoing treatment at the Psychosocial Care Center for Alcohol and Drugs - CAPS ad in Manaus, Brazil. The results indicated some issues related to gender inequality as influencing the maintenance of drug abuse by women, discussed in five categories: 1st Notions about gender inequality; 2nd use of drug abuse; 3rd lived social vulnerabilities, 4th Difficulties in treatment; 5th Perception of public policy for women with drug problems. Thus, it is concluded the importance of discussions and new research with a feminist context to address this problem, in order to think about better forms of prevention and treatment aimed at women and their particularities. http://ijaers.com/detail/abuse-of-psychoactive-substances-by-women-and-treatment-difficulties/ Lorena da Silva Barbosa, Tirza Almeida da Silva, Sônia Maria Lemos, Daniel Cerdeira de Souza, Luziane Vitoriano da Costa, Kenne Samara Andrade Martins, Rômulo Chaves Pereira de Oliveira, Eduardo Jorge Sant’Ana Honorato http://ijaers.com/uploads/issue_files/37IJAERS-08201932-Abuseof.pdf The impact of land use change in developing areas, especially at Passo Village, Ambon Bay, is a serious problem if continuously ignored, and then RT (neighborhood) number 21.22 and 23 will experience inundation throughout the rainy season. This is because sea levels are higher than residential areas. In order not to experience a long puddle, the solution is to make a water catchment well by considering the condition of the existing drainage system that is no longer able to be burdened. From the results of the hydrological analysis in a residential area of 12.71 Ha, an average runoff coefficient of 0.85 was found with a rainfall intensity of 72.83 mm / hour. From the results of the discharge analysis for the return period of 2 years is 2.17 m3 / sec. Permeability for infiltration wells on site is 0.847 m / day, the calculation of the need for infiltration wells installed at the study site is based on the analysis of the width of the building roofs for types 36, 45, 50, 60.70 and 120. Construction of water infiltration wells made using two types of aggregates rough for non-sand concrete (non-structural concrete) with a mixture of 1 cement and 6 rocks or broken stone. Water infiltration wells installed from the calculation results for material from coral are 663 pieces and from 670 broken stones, individual infiltration wells are made in a circle with a sinking diameter of 1.25 meters and a depth of 2 meters, thus found reduced surface flow efficiency that can be reduced type 36 is 12.69% type 45 is 9.9%, type 50 is 8.82%, type 60 is 7.25%, type 70 is 6.15% and type 120 is 3.50% of infiltration wells made of rock. http://ijaers.com/detail/application-of-the-porous-water-receipt-well-to-reduce-the-puddle-in-passo-village-ambon-city/ Obednego Dominggus Nara, Paulina Limba, John Rikumahu http://ijaers.com/uploads/issue_files/38IJAERS-08201921-Applicationof.pdf This article aims to analyze the institutional dynamics of the municipal public policy to promote cooperativism, between 2013 and 2017, in the municipality of Gurupi-TO, to qualitatively evaluate the dynamics of the institutional cycle of municipal public policy for cooperativism in Gurupi-TO based on the perception of public managers, managers and beneficiaries in relation to the qualitative performance of the municipal public policy and to identify the challenges and propose guidelines for the consolidation of the management of the public policy to foment the cooperativism in the municipality of Gurupi-TO. This is qualitative research, with data collection through bibliographical and documentary research and semi-structured interviews with ex-managers and managers who participated in and participated in the conduct of this policy and with the beneficiaries (small producers of family agriculture). Therefore, he envisaged the convergence of public management interests with local cooperativism, highlighting elements that may contribute to the consolidation of the public policy of fomenting cooperativism in Gurupi-TO by means of the political evaluation considering the aspects of the legitimacy of the process of elaboration of the actions, the perception of the beneficiaries of the public policy with the indication of the benefits and impacts in the conduct of the public policy of foment to the cooperativism. http://ijaers.com/detail/qualitative-aspects-of-the-cycle-of-municipal-public-policy-to-promote-cooperativism/ Kárita Carneiro Pereira Scotta http://ijaers.com/uploads/issue_files/39IJAERS-108201926-Qualitative.pdf Due to a variety of applications, there is an ever-increasing demand for urea and subsequently its production process remains a popular research topic. In the current climate however, studies for solving industrial challenges and the search for a more sustainable process design are required. Previous works concerning simulation of industrial scale production have been developed, however almost none of them are reproducible nor consider urea quality parameters. The severe process operating conditions and the lack of biuret information are the main challenges in modeling and simulating such complex process. This paper proposes a systematic approach for simulation and validation of the current urea production process. Industrial data from the largest operational urea facility in Latin America are used. Simulation is validated against more than 30 industrial parameters. Deviation of less than 6% is obtained for mass composition and less than 8% for other variables considered. This work is a key point for retrofit studies and design of new processes models. http://ijaers.com/detail/industrial-urea-process-simulation-and-validation/ Renata Chinda, Carlos Yamamoto, Daniel Lima, Fernando Pessoa http://ijaers.com/uploads/issue_files/40IJAERS-08201928-IndustrialUrea.pdf This study has the purpose of performing a systematic review of literature on quality in health care as a premise in quality management, oriented to patient satisfaction, favoring the service of the surgical room. The methodology adopted by this project relies on the model of text search on the web, proposed by Costa (2010), known as webibliomining. To this end, a search was made in the database of abstracts and citations of scientific literature, Scielo. The keywords applied were "peri-surgical care", "quality in nursing care", "pre-surgical visit", and "quality in surgical nursing care". The study period was from November 2018 to March 2019. Results indicated that the largest number of publications occurred in 2012, 2014, and 2016. A number of contributions and methods were found from the starting point, for example, important attributes regarding caring and the care referenced by the authors (quality in care, safety, and guarantee), biopsychosocial aspects with respect to the theoretical framework contributing as important management strategies for changes in patient care with quality. A significant aspect in the analyses collected was that scientific productions oriented to aspects of personal satisfaction of surgical patients, with regard to inherent aspects, are poorly referenced, which motivates the study so as to contribute to future researches by the scientific community. http://ijaers.com/detail/bibliometric-analysis-on-quality-in-health-care/ Luciana Iglesias de CastroSilva, Denise Cristina de Oliveira Nascimento http://ijaers.com/uploads/issue_files/41IJAERS-08201925-Bibliometric.pdf The increased use of pesticides due to the expansion of agricultural production and the lack of more comprehensive and rigorous legislation and enforcement has made Brazil a major consumer of pesticides, assuming in 2009 the position of largest consumer market of pesticides in the world. The state of Espirito Santo has a relevant influence on this prominence of the country, placing itself among the ten Brazilian states that have the largest sales in the country of this class of pesticides, being Santa Maria de Jetibá an important trader and consumer of pesticides due to its intense agricultural production. Given this intense commercialization of pesticides, and the problems caused by pesticides to environmental and human health, the objective was to make a situational diagnosis of the commercialization and use of pesticides in the municipality of Santa Maria de Jetibá-ES. For this, data from existing public studies and interviews with farmers from the municipality of Santa Maria de Jetibá were used, analyzing the influence on the Gross Domestic Product of the municipality. In the city of Santa Maria de Jetibá, there was intense agricultural production and intense use of pesticides, and the percentage share of GDP was much higher than those of neighboring cities that do not practice intensive agriculture. http://ijaers.com/detail/influence-of-pesticide-use-on-gross-domestic-product-in-santa-maria-de-jetib-es/ Nícolas Woelffel, Gilson Silva-Filho, Rosane Hein de Campos, Hélio Gustavo Santos http://ijaers.com/uploads/issue_files/42IJAERS-08201929-Influenceof.pdf