Statistics

    Map

Twitter

Determination of Seismic parameters of R.C.C. Building Using Shear Core Outrigger, Wall Belt and Truss Belt Systems
( Vol-5,Issue-9,September 2018 )
Author(s):

Archit Dangi, Sagar Jamle

Keywords:

Seismic forces, Outrigger, Shear core, Staad Pro, Response spectrum analysis, Belt supported system, truss supported system.

Abstract:

Structural analysis has been done since decades to study the behavior of lateral load resisting systems and for that outrigger structural system has done a tremendous job in this regard. The present work is to study high-rise G+10 3D computer model RCC structure under the influence of earthquake forces. The outrigger location used according to Taranath method. Response spectrum method is used for observing the performance of total seven different cases which include regular, shear core, outrigger and wall belt and outrigger and truss belt supported system. These are studied and parameters such as Base shear, column axial forces and member shear forces were examined. Efficient cases for all the parameters have discussed in this article too.

ijaers doi crossref DOI:

10.22161/ijaers.5.9.36

Paper Statistics:
  • Total View : 76
  • Downloads : 13
  • Page No: 305-309
Cite this Article:
MLA
Archit Dangi et al ."Determination of Seismic parameters of R.C.C. Building Using Shear Core Outrigger, Wall Belt and Truss Belt Systems". International Journal of Advanced Engineering Research and Science(ISSN : 2349-6495(P) | 2456-1908(O)),vol 5, no. 9, 2018, pp.305-309 AI Publications, doi:10.22161/ijaers.5.9.36
APA
Archit Dangi, Sagar Jamle(2018).Determination of Seismic parameters of R.C.C. Building Using Shear Core Outrigger, Wall Belt and Truss Belt Systems. International Journal of Advanced Engineering Research and Science(ISSN : 2349-6495(P) | 2456-1908(O)),5(9), 305-309. http://dx.doi.org/10.22161/ijaers.5.9.36
Chicago
Archit Dangi, Sagar Jamle. 2018,"Determination of Seismic parameters of R.C.C. Building Using Shear Core Outrigger, Wall Belt and Truss Belt Systems". International Journal of Advanced Engineering Research and Science(ISSN : 2349-6495(P) | 2456-1908(O)).5(9):305-309. Doi: 10.22161/ijaers.5.9.36
Harvard
Archit Dangi, Sagar Jamle. 2018,Determination of Seismic parameters of R.C.C. Building Using Shear Core Outrigger, Wall Belt and Truss Belt Systems, International Journal of Advanced Engineering Research and Science(ISSN : 2349-6495(P) | 2456-1908(O)).5(9), pp:305-309
IEEE
Archit Dangi, Sagar Jamle."Determination of Seismic parameters of R.C.C. Building Using Shear Core Outrigger, Wall Belt and Truss Belt Systems", International Journal of Advanced Engineering Research and Science(ISSN : 2349-6495(P) | 2456-1908(O)),vol.5,no. 9, pp.305-309,2018.
Bibtex
@article {architdangi2018determination,
title={Determination of Seismic parameters of R.C.C. Building Using Shear Core Outrigger, Wall Belt and Truss Belt Systems},
author={Archit Dangi, Sagar Jamle},
journal={International Journal of Advanced Engineering Research and Science},
volume={5},
year= {2018},
}
Share:
References:

[1] Abbas Haghollahi et all (2012), “Optimization of outrigger locations in steel tall buildings subjected to earthquake loads”, the 15th WECC, LISBOA.
[2] Ali sherif s. rizk, “Structural Design Of Reinforced Concrete Tall Buildings”, CTBHU Journal, 2010, Issue 1, pp. 43-41.
[3] Boggs, P.C., Casparini, D.A. (1983). Lateral stiffness of core outrigger systems. Engineering Journal, AISC 20:172-180.
[4] Hoenerkamp, J C D, Bakker, M C M. (2003). Analysis of high-rise building braced frames with outrigger belts Structural Design of Tall and Special Buildings. 12:335-350.
[5] Hoenerkamp, J C D. (2004).Shear wall with outrigger trusses on wall and column foundations. Structural Design of Tall and Special Buildings. 13: 73-87.
[6] Moudarres, F.R. (1985). Free vibration of outrigger braced structures. Proceeding of Institute of Civil Engineering. 16: 105-117.
[7] Wensheng Lu, Xilin Lu, Zhili Hu (1998), “Shaking Table Test of a High-rise Building Model with Multi-tower and Large Podium”, the 5th International Conference on Tall Buildings, pp. 814-819.
[8] Xilin Lu, Hua Yan, Jiang Qian et. Al. (1997), “Seismic Safety Analysis and Model Test of High-rise Building Structures”, Proceedings of International Symposium on Engineering for Safety. Reliability and Availability, pp.187-194.