Heartbeat and Temperature Monitoring System for Remote Patients using Arduino

( Vol-4,Issue-5,May 2017 ) OPEN ACCESS

Vikramsingh R. Parihar, Akesh Y. Tonge, Pooja D. Ganorkar


Arduino, Heartbeat Sendors, Health Monitoring System, Temperature Sensors.


This paper describes the working of a wireless heartbeat and temperature monitoring system based on a microcontroller ATmega328 (arduino uno). Most monitoring systems that are in use in today’s world works in offline mode but our system is designed such that a patient can be monitored remotely in real time. The proposed approach consists of sensors which measures heartbeat and body temperature of a patient which is controlled by the microcontroller. Both the readings are displayed in LCD monitor. Wireless system is used to transmit the measured data from the remote location. The heartbeat sensor counts the heartbeat for specific interval of time and estimates Beats per Minute while the temperature sensor measures the temperature and both the data are sent to the microcontroller for transmission to receiving end. Finally, the data are displayed at the receiving end. This system could be made available at a reasonable cost with great effect.

ijaers doi crossref DOI:


Paper Statistics:
  • Total View : 1837
  • Downloads : 141
  • Page No: 055-058
Cite this Article:
Click here to get all Styles of Citation using DOI of the article.