Investigating of Mechanical Properties of Mortars Based on Fly Ash and Blast Furnace Slag Activated with Alkali |
| ( Vol-4,Issue-2,February 2017 ) OPEN ACCESS |
| Author(s): |
Ozer Sevim, Ahmet Filazi, Baran Toprak, Saruhan Kartal |
| Keywords: |
|
Alkali activation, blast furnace slag, compressive strength, flexural strength. |
| Abstract: |
|
Alkali activated mortars obtained from granulated blast furnace slag and fly ash were used instead of Portland cement by activating with alkali. Sodium silicate and sodium hydroxide were activated blast furnace slag and fly ash. Mortar samples were prepared 40x40x160 mm as prismatic samples according to TS EN 196-1 and they were cured at room temperature. Compressive and flexural strength of the mortar samples including blast furnace slag and fly ash were investigated by experimenting. |
 DOI:
|
| Paper Statistics: |
|
| Cite this Article: |
| Click here to get all Styles of Citation using DOI of the article. |
- Track Your Paper
- editor.ijaers@gmail.com
- ISSN : 2349-6495(P) | 2456-1908(O)
Advanced Engineering Research and Science