Statistics

    Map

Twitter


Investigation of High-Speed Milling and High Efficiency Milling of AA6061

( Vol-7,Issue-12,December 2020 ) OPEN ACCESS
Author(s):

Manohar Pala, Karumanchi Viswanatha Sarma, Shatabdi Biswal, V Amudhavel, D Venkata Govinda Rao

Keywords:

Spacecraft, High-Speed Milling, High Efficiency Milling, AA6061, Machining.

Abstract:

Milling is one of the most prominent machining processes employed in the realization of spacecraft mechanical hardware which vary in size, shape, material and complexity. In this work a study is carried out to compare High-Speed Milling (HSM) and High Efficiency Milling (HEM) of AA6061. The machining time, surface roughness and tool wear were determined from the investigation. From the work it was found out that the lesser machining time with better surface finish was observed while machining by HSM than that of HEM and very negligible tool wear noticed.

Article Info:

Received: 18 Nov 2020; Received in revised form: 12 Dec 2020; Accepted: 19 Dec 2020; Available online: 29 Dec 2020

ijaers doi crossref DOI:

10.22161/ijaers.712.44

Paper Statistics:
  • Total View : 1385
  • Downloads : 19
  • Page No: 327-333
Cite this Article:
Click here to get all Styles of Citation using DOI of the article.