Investigation of High-Speed Milling and High Efficiency Milling of Ti6Al4V |
| ( Vol-8,Issue-2,February 2021 ) OPEN ACCESS |
| Author(s): |
Manohar Pala, Karumanchi Viswanatha Sarma, Shatabdi Biswal, V Amudhavel, D Venkata Govinda Rao |
| Keywords: |
|
Spacecraft, High-Speed Milling, High Efficiency Milling, Ti6Al4V, Machining. |
| Abstract: |
|
Ti6Al4V a Titanium alloy, is one of the prominent materials used in spacecraft components and it is a difficult to machine material. In this paper and experimental investigation is carried out to compare High Efficiency Milling (HEM) and High-Speed Milling (HSM) of Ti6Al4V. The MRR, surface roughness and tool wear were determined from the investigation. From the work it was found out that the MRR for HEM was less than that of HSM, while surface roughness variation was less and no significant tool wear was observed for HEM strategy. |
| Article Info: |
|
Received: 19 Nov 2020; Received in revised form: 18 Jan 2021; Accepted: 28 Jan 2021; Available online: 09 Feb 2021 |
 DOI:
|
| Paper Statistics: |
|
| Cite this Article: |
| Click here to get all Styles of Citation using DOI of the article. |
- Track Your Paper
- editor.ijaers@gmail.com
- ISSN : 2349-6495(P) | 2456-1908(O)
Advanced Engineering Research and Science