Statistics

    Map

Twitter


Study of Properties of Al LM-25/SIC fabricated by using Stir Casting Method and Wear Analysis by RSM

( Vol-5,Issue-2,February 2018 ) OPEN ACCESS
Author(s):

Rahul D. Shelke, Hitesh Balaram Patil, Navnath S. Kalyankar

Keywords:

Al/SiC, Al LM-25, Hardness, MMCs, Tensile Strength, Wear Resistance, Response Surface Methodology.

Abstract:

Aluminum MMC’s are widely used in various applications because of their higher mechanical and physical properties when compared with their base Al alloy. This paper focuses on the change in mechanical properties of various Al/SiC composites fabricated by using stir casting method. Effect of SiC reinforcement in different Al alloys on mechanical properties like hardness, tensile strength, wear test, percentage elongation, residual stress measurements are discussed in detail. For this purpose various reinforcement of SiC with 0,4,8 percent weight and different particle sizes are considered along with Al alloys. Variations in process parameters of stir casting are also made and taken into consideration.

ijaers doi crossref DOI:

10.22161/ijaers.5.2.15

Paper Statistics:
  • Total View : 1594
  • Downloads : 42
  • Page No: 115-118
Cite this Article:
Click here to get all Styles of Citation using DOI of the article.